My sister in law moved her Pilates studio to a new location. The space lets in a lot of natural light. In the new space, the existing partitions were taken down and a one new one was added.
Fun pictures of the demolition have gone missing, unfortunately. I’ll add them in if I can track them down.
Mounting the springboards turned out to be an interesting challenge. The springboards are designed to mount on 16 inch centers. The target wall had steel studs at 24 inch centers. Final solution was to screw 3/4 inch plywood to the steel studs to provide a solid mounting surface for the springboards. I skinned the 3/4 plywood with birch plywood and milled the trim pieces with an emphasis on clean lines and a minimum of visible joints.
(click for full size)
Here’s a shot with a bit different light:
This is a view on the other side of the studio from my work with the springboards- lots of light and equipment- makes for a very cool look:
