I had previously made a combo insert to get Splendor and Splendor Duel in the same box. Post [here]. It was functional, but I didn’t really care for the way it looked. The laser cutter makes a really straight square line, but also shrinks the foam a little bit from the heat. The cut edges are just not very attractive.
A little dissatisfied with my results, I tinkered around and came up with a slightly improved version. I used relatively lightweight foam for the large spacer, and redesigned the spacer for the Noble cards to hold the cards in place. I also moved the alignment of the “bays” around for a more balanced look. The biggest improvement is probably a top plate that hides most of the cut edges. Gives it a more finished look.
